Differences

This shows you the differences between two versions of the page.

--- ease:machinelearning:decision_trees [2020/06/22 10:13] – s_fuyedc
+++ ease:machinelearning:decision_trees [2020/06/22 11:42] (current) – s_fuyedc
@@ Line 1: / Line 1: @@
 ===== NEEMS Lecture: 3. Brief Introduction to Decision Trees =====
-In [[https://ease-crc.org/material/ease/machinelearning/data_preparation|the previous section]] we prepared the NEEMS data for training. Here we will get into decision trees, how they are built and how to read them.
+In [[https://ease-crc.org/material/ease/machinelearning/data_preparation|the previous section]] we prepared the NEEMS data for training in a one-hot-encoding manner. Here we will get into decision trees, how they are built and how to read them.
 The statistic model of choice is a decision tree. Such models have the advantage of being visually inspectable and comprehendible, as well as more or less easy to understand. Based on the Information about the //type// and //parent// of a task, the decision tree model predicts the most probable //next// action to come. In this section, a minimal set of example data is used to train a decision tree. It should give a first grasp of what we are about to do without our NEEMS data later.
@@ Line 9: / Line 9: @@
 The chapter **3.2 Preview of a Trained Decision Tree** shows an example decision tree, based on the example data. It resembles the decision about where to put an object. In each node of the tree, there are 4 to 5 entries. To elaborate on the entries' meaning, we focus on the root node.
+{{ :ease:machinelearning:example-dt-table.png |}}
+The table above is all our data we use for this modelling example. Notice, that a pack of milk always goes into the fridge.
 {{ :ease:example_tree.png |}}
-//object_milk %%<=%% 0.5// names a condition. If the object at hand is milk is presented as a numerical value between 0.0 and 1.0, where a value below 0.5 means true, and above 0.5 is false. To understand this, look at a node and negate the first predicate of this condition, meaning the outcome of //object_milk %%<= 0.5%%// is true when the predicate is **not** milk (below 0.5). Whether the condition is true or false, the decision tree branches down to the next node, in this case to the left (true), when it's probably **not** milk, and to the right (false), when it **is** milk. If it is not milk (true), the tree goes down to the left child node and does the same process of decision as the root node, now investigating if the condition //object_cereal %%<=%% 0.5// is true. This process goes on until a leaf node is found.
+//object_milk %%<=%% 0.5// names a condition. Since all our features have been prepared with one-hot-encoding, their value will always be either 1 or 0, whereas in more intricate models those values may have a continuous floating value ranging between those values. In our model we only have binary decisions. If the object at hand is milk is presented as a numerical value 0.0 or 1.0, where 0.0 evaluates the condition to true, and 1.0 evaluates to false. To understand this, look at a node and negate the first predicate of this condition, meaning the outcome of //object_milk %%<= 0.5%%// is true when the predicate is **not** milk (below 0.5). Whether the condition is true or false, the decision tree branches down to the next node, in this case to the left (true), when it's probably **not** milk, and to the right (false), when it **is** milk. If it is not milk (true), the tree goes down to the left child node and does the same process of decision as the root node, now investigating if the condition //object_cereal %%<=%% 0.5// is true. This process goes on until a leaf node is found.
-//gini = 0.719// gives the Gini Impurity value, which is calculated and explained in section 3.4
+{{ :ease:machinelearning:gini_calc.png |}}
+//gini = 0.719// gives the Gini Impurity value, which is calculated via the formula above for each node separately. More to that later.
 //samples = 8// tells the number of possible decisions for the whole scenario. In the root, we have all 8 entries of our example_data at our service.
-//value = [3, 2, 1, 2]// tells the sum of decidable goal locations over all objects, sorted like in the table above. [cupboard, dishwasher, drawer, fridge]. The further down we go along the tree, the more decisions have been made, and the fewer possibilities for a decision are left. So if the first node decides, the object is **not** milk, the predicted goal location will never be //fridge//, since no other object than milk is going to the fride, an therefore the last entry of this array of numbers is going to be 0 for all upcoming nodes.
+//value = [3, 2, 1, 2]// tells the sum of decidable goal locations over all objects, sorted like in the table above. [cupboard, dishwasher, drawer, fridge]. The further down we go along the tree, the more decisions have been made, and the fewer possibilities for a decision are left. So if the first node decides, the object is **not** milk, the predicted goal location will never be //fridge//, since no other object than milk is going to the fridge, an therefore the last entry of this array of numbers is going to be 0 for all upcoming nodes.
 //class = cupboard// is the output decision of the model. In this example the model tries to find a place, where to put an object. If the object is milk (like in the root node) the decision is always to put it in the fridge (branch right from the root node). For any node other that a leaf, the class represents the most likely place to put the object up until this point of decision-making.
@@ Line 25: / Line 29: @@
 Gini Impurity, just like the //entropy// of a model, is a measurement for the likelihood of a new random variable to be incorrectly labeled, if it were to be randomly labeled according to the distribution of the labels. The higher the Gini impurity, the less likely successful labeling of a new variable is.
-The calculation of the Gini Impurity is shown in the lecture, as well as its implementation. For our example_data this value is at 0.71875, rounded to 0.719 as shown in the decision tree above. We will now find out how to use this calculation for our purposes.
+The calculation of the Gini Impurity is shown in the lecture, as well as its implementation. For our example_data this value is at 0.71875, rounded to 0.719 as shown in the decision tree above.
+In other words: The Gini impurity gives an idea on how //sure// the decision of the model is until this point. The higher the value, the more possible predictions are possible and the less secure a prediction would be up to this point. A lower Gini score in the leaves is mostly better. On the other hand, if all the leaf nodes contain a Gini score of 0.0, the model might be overfitted. Keep in mind to always keep a grain of vagueness to a model, such that new input features can still result in a prediction of a certain degree of certainty.
 **3.5 Cost Function / 3.6. Picking a Threshold / 3.7 Determining the Root node**
@@ Line 31: / Line 37: @@
 The goal now is to calculate the impurity depending on which feature of the example_data is chosen as the root node of the decision tree. Therefore a cost function is implemented considering one feature (e.g. 'object_milk') and a threshold for false data.
-This cost function is applied to every feature and sorted ascending with their respective cost value. Determining the root node is essential for optimizing the model. A feature with especially high influence in the model is considered to gain a lot of information, which makes it reasonable to put closer to the root of the decision tree.
+{{ :ease:machinelearning:gini_cost_calc.png |}}
+This cost function is applied to every feature and sorted ascending with their respective cost value. Determining the root node is essential for optimizing the model. A feature with especially high influence in the model is considered to gain a lot of information, which makes it reasonable to put them closer to the root of the decision tree. Decisions, that can be made with fewer branching, are done much faster.
 In [[https://ease-crc.org/material/ease/machinelearning/machine_learning_theory|the next section]] we will talk about some more machine learning theory.